AIR BAIL
Daiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth protrusion-free design and construction line easily slides unencumbered along the Air Bail towards the line roller for trouble free line control.
AIR ROTOR
Lighter, stronger and more balanced than any rotor system that’s come before, ‘Air Rotor’ delivers a great leap forward in rotor design and function and delivers the ultimate reel sensitivity and rotational balance.
ATD DRAG
Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
DIGIGEAR
Daiwa’s first generation of digitally engineered gear design ensures a perfect mesh between ultra-tough drive gear and pinion gears for optimized speed, power, durability and smoothness.
MONOCOQUE (MQ)
MQ Body takes reel design to the next level. The MQ system does not require a body cover, instead using an engine plate to screw directly to the body. Eliminating the need for screws to hold a body cover in place. MQ body improves the strength of the reel, it also improves the water-resistance of the body and allows a larger diameter drive gear to be installed.
DAIWA CERTATE SW G REEL SIZE & DETAILS
SIZE/ MODEL
BALL BEARING
MAX DRAG
GEAR RATIO
LINE CAPACITY
(LB. TEST / YARDS)
CERTATESWG5000-XH
9+1BB, 1RB
33LB / 14KG
6.2:1
14/280, 20/180
Braid : 40/160
CERTATESWG6000-XH
9+1BB, 1RB
33LB / 14KG
6.2:1
14/340, 20/270
Braid : 40/240
CERTATESWG8000-H
8 + 1RB
55LB / 24KG
5.8:1
16/330, 20/280
Braid : 50/280
CERTATESWG10000-H
8 + 1RB
55LB / 24KG
5.8:1
20/330, 25/280
Braid : 65/280
CERTATESWG14000-XH
8 + 1RB
55LB / 24KG
6.2:1
25/330, 30/290
Braid : 80/280
CERTATESWG18000-H
8 + 1RB
65LB / 29KG
5.8:1
30/400, 40/280
Braid : 80/330
Country of Origin: : Made in Japan
Weight :368-850gr
Body & Sideplates: Monocoque aluminum body Magseal Body Zion Rotor
Spool: ABS aluminum spool Rated for use with braided lines, mono and fluorocarbon
Externals: Air Bail–tubular stainless for lightweight strength Magseal line roller
Drag: Waterproof Advanced Tournament Drag System
Handle: Machined aluminum handle arm with oversized aluminum ball knob
Internals: G1 Duralumin Main Gear Mag Sealed Automatic rotor brake keeps rotor stationary when bail is open Dual, full-time infinite anti-reverse Manual bail trip for maximum reliability
Warranty: 1 year warranty with online registration
Daiwa Certate SW spinning reels are here for your inshore and offshore pleasure. Certate SW is based on the same platform as Saltiga. It features a monocoque aluminum body with a G1 duralumin main gear that packs a lot of punch. Turn the knob and it's super smooth! Like the Saltiga, the Certate SW uses the Advanced Drag Tournament System, which creates a maximum of 55-65 pounds of drag (depending on size)! That's an insane amount of resistance, which will come in handy when holding something big! To keep out water, sand and salt, the Certate SW has a Magsealed body and a Magsealed bearing on the line spool. The line roller is one of the parts most likely to fail on a spinning wheel, and this greatly reduces the chance of failure. It may seem simple, but it is one of the obvious reasons why you should choose a bed that does not have the same protection. There is nothing worse than having your equipment break on the water. The aluminum handle with a strong oval is beautiful and gives you a good grip when trolling on a jig or jig or handling large pelagic fish. If catching big fish in saltwater is your passion, buy a Daiwa Certate SW spinning reel! Daiwa Certate SW spinning reels are available in six sizes from 5000-18000. They changed their tire size to meet the industry standard.